Membrane for foundation
Cavity geomembrane models
|
Name
|
Density, g/m2 | Compressive strength, kN/m2 | Maximum tensile strength, (along/across), N/50mm | Elongation at maximum load (along/across), % | Roll area, m2 | Roll length, m | Price in UAH, m2 including VAT |
|
Cavity drain membrane Hydrostop PRO (0,5m*20m)
|
350 | >125 | >170/>170 | ≥ 35 / ≥ 35 | 10 | 20 | 36,00 |
|
Cavity drain membrane Hydrostop PRO (1m*20m)
|
350 | >125 | >170/>170 | ≥ 35 / ≥ 35 | 20 | 20 | 43,20 |
|
Cavity drain membrane Hydrostop PRO (1,5m*20m)
|
350 | >125 | >170/>170 | ≥ 35 / ≥ 35 | 30 | 20 | 46,20 |
|
Cavity drain membrane Hydrostop PRO (2m*20m)
|
350 | >125 | >170/>170 | ≥ 35 / ≥ 35 | 40 | 20 | 43,10 |
|
Cavity drain membrane 400 Hydrostop PRO MAX (0,5m*20m)
|
400 | >170 | >170/>170 | ≥ 35 / ≥ 35 | 10 | 20 | 39,00 |
|
Cavity drain membrane 400 Hydrostop PRO MAX (1m*20m)
|
400 | >170 | >170/>170 | ≥ 35 / ≥ 35 | 20 | 20 | 47,28 |
|
Cavity drain membrane 400 Hydrostop PRO MAX (1,5m*20m)
|
400 | >170 | >170/>170 | ≥ 35 / ≥ 35 | 30 | 20 | 50,52 |
|
Cavity drain membrane 400 Hydrostop PRO MAX (2m*20m)
|
400 | >170 | >170/>170 | ≥ 35 / ≥ 35 | 40 | 20 | 47,28 |
|
Cavity drain membrane 500 Hydrostop PRO MAX (1m*20m)
|
500 | >230 | >200/>200 | ≥ 35 / ≥ 35 | 20 | 20 | 60,72 |
|
Cavity drain membrane 500 Hydrostop PRO MAX (2m*20m)
|
500 | >230 | >200/>200 | ≥ 35 / ≥ 35 | 40 | 20 | 60,72 |
|
Cavity drain membrane 600 Hydrostop PRO MAX (2m*20m)
|
600 | >300 | >240/>240 | ≥ 35 / ≥ 35 | 40 | 20 | 74,28 |
|
Cavity drain membrane Hydrostop GEO 500+100 g/m² (2m*15m)
|
500+100 | >230 | >200/>200 | ≥ 35 / ≥ 35 | 30 | 15 | 186,00 |
|
Cavity drain membrane Hydrostop GEO 500+150 g/m² (2m*15m)
|
500+150 | >230 | >200/>200 | ≥ 35 / ≥ 35 | 30 | 15 | 198,00 |
Certificate for cavity geomembrane
Membrane for foundation is a polymer fabric that provides all-round protection and is made of high-density polyethylene (HDPE). This single-layer material has hollow protrusions, studs on one side, and cavities – on the other. Flexx manufacturing company offers bargain price for a membrane for foundation in rolls with a width of 2 m and length of 20 m to all interested customers.
Why membranes for foundation are necessary
A foundation is a building construction that is the basis for any building. Its quality and reliability determine the durability of load-bearing elements. Ground and surface (melted and rain) water can penetrate the concrete structure, which leads to microclimate deterioration in basements. Also, when moisture freezes in pores, destructive processes occur. Washing out and leaching of concrete components are no less dangerous. Given all this, it is important to arrange proper and comprehensive protection against moisture. The waterproofing membrane for foundation can be the best solution. This roll material is completely moisture-resistant and does not allow the underground structures to come into contact with water when observing the technology. Geomembrane for foundation is also able to provide:
- protection of other structural materials from mechanical damage;
- even load distribution on the foundation;
- cutting off the moisture capillary rise from the soil through the concrete into the walls;
- resistance to the negative influence of biological factors, including the destructive action of roots.
Advantages of a cavity geomembrane for foundation
Our company manufactures cavity membranes for foundation in compliance with DSTU EN 13967:2019. To satisfy the requests of a wide range of customers, our materials are available in different densities. Thus, products with a value of 400 g/m2 are suitable for protecting foundations up to 2 m deep. Otherwise, thicker fabric is required. The profiled foundation membrane advantages include:
- resistance to aggressive chemicals. Groundwater may contain salts that cause acidic or alkaline reactions. A high-quality protective membrane for foundation is not susceptible to their action and will retain its properties throughout its service life;
- resistance to mechanical stress, flexibility, and elasticity. The stretching resistance value in fabrics of different densities varies from 170 to 240 N/50 mm;
- flexibility in use. One can use a membrane under the foundation slab, above it, or as side protection;
- durability. The material service life is not less than 50 years provided the installation technology is observed.
- formation of an additional insulating layer. This applies to noise load reduction and freezing protection;
- operation in a wide temperature range. Membrane waterproofing of the foundation withstands thermal stress from -40 to +80°C;
- ease of installation without special tools or equipment.
Profiled membrane for foundation installation
Membrane for foundation installation is to be performed in strict accordance with the technology, otherwise, the risk of not coping with the task is high. First, you should make sure that the surface is clean and flat. We also recommend laying foundation waterproofing membranes only on a dry base. In case it is used as the only protection layer, then the studs, protrusions should be placed towards the wall. At the same time, a number of important aspects should be considered:
- the upper edge should rise 10-30 cm above the ground level. It is to be fixed with a special strip;
- the membrane for foundation waterproofing is fixed to the wall with dowels at a spacing of 30 cm. An upstand of 10-20 cm is made at the joints. Lines of juncture are taped with double-sided butyl rubber tape;
- a drainage pipe must be provided around the perimeter to drain water from the building.
Where to buy a membrane for foundation in Ukraine
Our company offers to buy a waterproofing membrane for foundation, the price of which directly depends on the density. The absence of intermediaries allows us to eliminate additional markups and determine an attractive price. One can purchase materials with delivery across Ukraine. Our managers are ready to provide you with qualified consulting support.
